Caterpillar OFF HIGHWAY TRUCKS 777G - catalog of spare parts
Service replenishment options
Cooling system - 63.4 gal
Steering system - including tank - 14.1 gal
Lift brake system - includes tanning - 117gal
Carter - 28.7 gal
Torque converter - transmission system - 36.5 gal
Lift brake system - 85 gal
Last trip - each - 20gal
Fuel Tank (1) - 300 Gallons
Differentials - 59.9gal
Fuel Tank (2) - 350 Gallons
Choose OFF HIGHWAY TRUCKS 777G section:
Specifications
Engine
Cylinders - 12
Pure torque - 3899 pounds
Displacement - 1959cu in
Barrel diameter - 5.7 inches
Stroke - 6.4 inches
Net Power - ISO 9249 - 916 HP
Net Power - SAE J1349 - 916 HP
Net power - 80/1269 / EEC - 916 hp
Gross Power - SAE J1995 - 1025 HP
Engine Model - Cat C32 ACERT
Engine power - ISO 14396 - 1008 HP
Peak Torque - Speed - 1200 rpm
Engine speed - 1800 rpm
Transmission
Reverse - 7.7 mph
Forward - 1 - 6.8 mph
Ahead - 2 - 9.2 mph
Forward - 3 - 12.5 mph
Forward - 4 - 16.9 mph
Forward - 5 - 22.9 mph
Forward - 6 - 30.7 mph
Forward - 7 - 41.7 mph
Steering
Steering Standards - SAE J1511 FEB94 ISO 5010: 1992
Rotation angle - 30.5 degrees
Turning Diameter - Front - 83 Feet
Turntable - Clearance Diameter - 93 Feet
Tires
Standard tire - 27.00R49 (E4)
the brakes
Brake Standards - ISO 3450: 1996
Brake Surface Area - Rear - 15828in2
Brake Surface Area - Front - 6331in2
Body Lifts
Pump flow rate - high idle - 120.9 gal / min
Relief Valve Installation - Lift - 2750 psi
Body Lift Time - High Idle - 15 s
Body Lowering Time - Float - 13 s
Relief Valve Installation - Bottom - 500 psi
Body Lower Time - High Idle - 13 s
Latest discs
Planetary ratio - 7.0: 1
Differential coefficient - 2.736: 1
Total reduction ratio - 19.1576: 1
Performance characteristics
Nominal Payload Class (100%) - 196,800 pounds
Top Speed - Loaded - 41.7 mph
Body volume - SAE 2: 1 - 83.8yd3
Do not exceed payload (120%) * - 236,200 pounds
Nominal Payload (100%) - 196,800 pounds
Maximum Payload (110%) - 216,400 pounds
Weight Distribution - Approximate
The front axle is empty - 46%
Front axle - loaded - 33%
The back bridge - empty - 54%
Rear Axle - Loaded - 67%
Weights - Approximate
Target Gross Vehicle Weight - 363,000 Pounds
Capacity - double slope - 100% duty cycle
Amazed - 54.8yd3
Heap 2: 1 (SAE) - 78.8d3
ROPS
ROPS / FOPS Standards - Standards
Sound
Sound Standards - Standards
Suspension
Rear Axle - Fluctuations - 5.4 degrees
Empty loaded cylinder forward - 2.9in
2.5 ”empty cylinder reverse gear with load
Capacity - Carbon bodies - 100% duty cycle
SAE 2: 1 - for use with a material density of 1160 kg / m3 (1,950 lb / yard3) - 116yd3
SAE 2: 1 - for use with material densities of 1040-1160 kg / m3 (1750-1,950 lbs / yard3) - 139yd3
SAE 2: 1 - for use with material densities of 950-1040 kg / m3 (1600-1750 pounds / cubic foot) - 144yd3
SAE 2: 1 - for use with material densities less than 950 kg / m3 (1600 lbs / yard3) - 165 feed3
Capacity - X Body - 100% duty cycle
Amazed - 56.3yd3
Heap 2: 1 (SAE) - 83.8d3